New Code Sent!
Discover Triple Filtration
Designed with a renewable coconut shell-based activated carbon core, Triple Filtration works to reduce harmful contaminants from your refrigerator water.
Reduce up to 75 potentially harmful contaminants*
Each stage of Triple Filtration reduces more potentially harmful contaminants, including 99% of microplastics, including those 60x smaller than a grain of sand and 97% of lead from your water, leaving it crisp, clean and refreshing.
PARTICLE
FILTRATION
Catches and reduces larger particles like sediment and asbestos.
MICRO
FILTRATION
Captures medium-sized contaminants like microplastics and waterborne parasites.
ABSORPTION
FILTRATION
Absorbs difficult-to-eliminate chemicals that might affect taste and quality like heavy metals and chlorine.
How-to-videos
Easily replace your filter
Find your filter number below and see how to make the simple switch — so you can get clean water all year long.
EDR1RXD1
Filter 1
How-to replace refrigerator filter model EDR1RXD1.
EDR2RXD1
Filter 2
How-to replace refrigerator filter model EDR2RXD1.
EDR3RXD1
Filter 3
How-to replace refrigerator filter model EDR3RXD1.
EDR4RXD1
Filter 4
How-to replace refrigerator filter model EDR4RXD1.
FAQ
Download your everydrop® water filter guide here, or use the Filter Finder tool located at the top of this page.
For clean, fresh tasting water, everydrop® recommends replacing your water filter every 6 months. It may need to be changed more frequently depending on your usage and water quality.
Your water filter is not self-cleaning. Resetting your indicator light will not reset your filter or clean it. Only regular replacement of your water filter will ensure your family has a continuous supply of clean filtered water.
Quarter Turn Filter
Find the filter cartridge cap in the base grille.
Rotate the cap counterclockwise to a vertical position, and then pull.
Remove the filter cap by sliding it right or left. Set aside cap. Discard old filter.
Remove the packaging and O-ring covers from the new filter. Slide the filter cap on.
Purge air from the water line. See instructions below.
Push Button Filter
Find the filter cartridge cap in the base grille. Do not remove cap yet.
Push the eject button, and then pull the filter cap. Do not twist cap.
Remove the filter cap by turning it counterclockwise. Set aside cap. Discard old filter.
Remove the packaging and O-ring covers from the new filter. Slide the filter cap on.
Push filter into the base grille until the eject button pops. Gently tug on cap to ensure it is snug.
Align arrows on the cap and new filter. Turn clockwise to snap in place.
Purge air from the water line. See instructions below.
Bottom Mount / French Door Filter
Locate the filter in the upper right corner of the fresh food compartment.
There are two cover types: PUSH or PULL. If the word PUSH isn't on the cover, it's a PULL.
To open PUSH cover: Push the tab in and down. To open PULL cover: Pull forward gently.
Remove the packaging and sealing label from the new filter.
Insert filter by gently rotating clockwise until it stops. Snap filter closed.
Purge air from the water line. See instructions below.
Purge Air from the Water Line
After replacing the filter, flush air from the system to prevent the dispenser from dripping.
Using a cup, press and hold the dispenser for 5 seconds, and then release for 5 seconds.
Repeat until water flows, and then continue for an additional 2 minutes.
If your dispenser drips, do this again to flush air that enters the system from the water supply.